出生年月

196704

籍贯

江西南昌

职称

 教授

学历

 博士

电话

+86-10-82317725

办公室

新主楼A512

系别

 工业与制造系统工程

职务

系主任

电子信箱

 lyzheng@buaa.edu.cn

传真

个人主页

◆学习经历

1985/09-   1989/07：皇冠手机官方网站【中国】有限公司本科生
  1990/09- 1993/03：皇冠手机官方网站【中国】有限公司硕士研究生
  1997/09- 2001/07：皇冠手机官方网站【中国】有限公司博士研究生
  2006/10- 2007/10：英国巴斯大学(University of Bath)机械工程系访问学者

2007/07-2007/08：英国克兰菲尔德大学（Cranfield University）航空学院高级学员

◆工作经历

1993/04-   1994/07：皇冠手机官方网站【中国】有限公司，助教
  1994/08- 1999/07：皇冠手机官方网站【中国】有限公司，讲师
  1999/08- 2009/07：皇冠手机官方网站【中国】有限公司，副教授
  2002/03-2002/06：香港城市大学制造工程与工程管理系, 副研究员
  2009/08- 至今 ：皇冠手机官方网站【中国】有限公司教授，博士生导师

◆研究领域

1.数字化与智能制造技术；2.工业智能及应用； 3.可重构柔性智能工装技术； 3. 制造建模与仿真技术。

◆荣誉及奖励

2016年 获批第二批来华职工精品课《先进制造技术》;

2016年 《计量学报》2011-2015年优秀论文；
  2015年 《航空学报》20年（1995-2015）高被引论文奖；
  2014年 皇冠手机官方网站教学成果一等奖；
  2013年 皇冠手机官方网站优秀硕士论文指导教师；
  2010年 皇冠手机官方网站教学成果二等奖；
  2009年 成飞奖教金一等奖；
  2008年 航空工业第一集团公司科技进步二奖；
  2004年 皇冠手机官方网站教学成果三等奖；
  2003年 北京市青年优秀论文三等奖；
  1997年 原航空工业总公司（部级）科技进步三等奖

◆开授课程与指导研究生

1.       主讲本科生必修课《计算机辅助制造》（皇冠手机官方网站精品课）;

2.       主讲研究生学位课《制造系统建模与仿真》；

3.       指导研究生：硕士研究生2-3名/年、博士生1-2名/年，以及职工和工程硕士生等。
  毕业研究生主要去向：华为、百度、联想、宝信等知名信息技术企业，维斯塔斯、康明斯等外企、法国巴黎高科、香港理工、皇冠手机官方网站、北邮等国内外高校。

欢迎机械设计制造及自动化、机械电子工程、工业与系统工程、信息与控制工程等专业，特别是具有软硬件开发基础的毕业生报考。

◆教学及科研成果

郑联语教授多年来一直从事数字化与智能制造、柔性智能工艺装备、先进测量与质量控制、制造系统建模与仿真等方向的研究及教学工作。在科研方面，在国内外核心期刊和国内国际会议上发表论文130余篇，曾获《航空学报》20年(1995-2015)高被引论文奖，《计量学报》(2011-2015年)优秀论文奖；北京市青年优秀论文奖。作为主编或编委合著   《计算机辅助设计与制造》（机械工业出版社）、和《MasterCAM 8.0基础教程》（人民邮电出版社）。曾主持和承担国家、国家科技支撑、国家863等各类重要项目10余项，以及多项与中国商飞、中航工业、航天科技、航天科工、长春一汽等大型国有企业的厂所合作项目。获部级科技进步二、三等奖各1项，软件著作权10项，申请和授权发明专利16余件；在教学方面，主讲本科生必修课《计算机辅助制造》（皇冠手机官方网站精品课）、研究生学位课《现代制造系统建模与仿真》，指导和培养中外硕士、博士研究生余60名。曾获皇冠手机官方网站“成飞”奖教金一等奖1项，皇冠手机官方网站教学成果一、二、三等奖各1项，皇冠手机官方网站优秀研究生指导教师。

近期承担的代表性科研项目：

[1] 大部件装配界面分体式互操作自适应精加工理论与应用基础。国家自然科学基金。主持。

[2]   基于视觉测量的大型构件原位感知及精准定位技术研究。复杂产品智能制造系统技术国家重点实验室基金。主持。

[3] 盒式连接XXXX智能装配工装技术。XXX基础科研项目，主持。

[4] 面向大型XXX机构装配现场的可穿戴技术。XXX基础科研项目，主持。

[5] 飞机典型制造车间智能管控技术。工信部民机科研项目，专题负责人。

[6] 基于虚拟现实/增强现实的智能化辅助装配技术。工信部民机科研项目，参与。
  [7] 国产专用数控系统（工艺规划与仿真）。航天科工集团北京航天数控公司项目（04专项），参与。
  [8] 基于场模型与关键特性的大尺寸球坐标测量系统优化配置方法。国家自然科学基金，主持。
  [9] 多平台高节拍汽车车体柔性焊装生产线关键技术及设备。国家科技支撑项目，参与。
  [10].大飞机垂尾精加工台与可重构机床关键技术。上飞/江苏恒力组合机床公司协作项目，主持。
     

发表的代表性论著：

[1]Yiwei WANG, Jian Zhou, Lianyu Zheng*, Christian GOGU.An   end-to-end fault diagnostics method based on convolutional neural network for   rotating machinery with multiple case studies.Journal of Intelligent   Manufacturing,2020

[2]Wang Qilong,Wei Wang*,Lianyu Zheng,Chao Yun.Force   control-based vibration suppression in robotic grinding of large thin- wall   shells.Robotics and Computer-Integrated Manufacturing August 2020.

[3]Wei Fan,Wei Ji,Lihui Wang*,Lianyu Zheng,Yahui Wang.A Review   on Cutting Tool Technology in Machining of Ni-Based Superalloys.International   Journal of Advanced Manufacturing Technology,September 2020.

[4] Shufei Li, Pai Zheng, Lianyu Zheng*. An AR-Assisted Deep   Learning Based Approach for Automatic Inspection of Aviation Connectors. IEEE   Transactions on Industrial Informatics,2020,DOI: 10.1109/TII.2020.3000870.

[5] Lianyu Zheng*, Xinyu Liu, Zewu An,et al. A smart assistance   system for cable assembly by combining wearable augmented reality with   portable visual inspection.Virtul Reality and Intelligent Hardware.February   2020,DOI: 10.1016/j.vrih.2019.12.002

[6]Wei Fan, Lianyu Zheng*,et al. A machining accuracy informed   adaptive positioning method for finish machining of assembly interfaces of   large-scale aircraft components. Robotics and Computer Integrated   Manufacturing 67 (2021) 102021.  

[7] Wei Fan, Lianyu Zheng,et al. Function block-based   closed-loop adaptive machining for assembly interfaces of large-scale   aircraft components.Robotics and Computer Integrated   Manufacturing,2020,

[8] Zewu An, Yiwei Wang, Lianyu Zheng*. Adaptive Recognition of   Intelligent Inspection System for Cable Brackets in Multiple Assembly   Scenes.The International Journal of Advanced Manufacturing Technology.   2020,108(11):3373-3389. DOI: 10.1007/s00170-020-05591-5

[9]Jian Zhou Lianyu Zheng,Yiwei Wang*,Christian Gogu.A   multistage deep transfer learning method for machinery fault diagnostics   across diverse working conditions and devices.IEEE Access,2020,DOI:   10.1109/ACCESS.2020.2990739.

[10] Wei Fang, Lianyu Zheng. Shop-floor data-driven   spatial-temporal verification for manual assembly planning. Journal of   Intelligent Manufacturing.2019, online 12 Stempber 2019.

[11] Wei Fan, Lianyu Zheng, et.al. Eddy Current-Based Vibration   Suppression for Finish Machining of Assembly Interfaces of Large Aircraft   Vertical Tail.Journal of Manufacturing Science and Engineering,   2019,141:071012-1~071012-16.

[12] Hongbo Zhang, Lianyu Zheng, et.al.Intelligent configuring   for agile joint jig based on smart composite jig model. The International   Journal of Advanced Manufacturing Technology. 2019,  

[13] Yong Zhou,Jian-Jun Yang,Lianyu Zheng.Multi-agent based   hyper-heuristics for multi-objective flexible job shop scheduling: A case   study in an aero-engine blade manufacturing plant.Feb 2019,IEEE Access.DOI   0.1109/ACCESS.2019.2897603,

[14] Yong Zhou,Jian-Jun Yang,Lianyu Zheng.Hyper-heuristic   coevolution of machine assignment and job sequencing rules for   multi-objective dynamic flexible job shop scheduling.Nov 2018,IEEE Access.

[15] Yahui Wang, Lianyu Zheng,Yu Hu, Wei Fan.MULTI-SOURCE   HETEROGENEOUS DATA COLLECTION AND FUSION FOR MANUFACTURING WORKSHOP BASED ON   COMPLEX EVENT PROCESSING.48th International Conference on Computers and   Industrial Engineering (CIE 48), Auckland, New Zealand, Dec. 2-5, 2018.

[16] Wei Fan,Lianyu Zheng,Yahui Wang.An automated reconfigurable   flexible fixture for aerospace pipeline assembly before welding.   International Journal of Advanced  Manufacturing Technology, 2018,  

[17] Wei Fang, Lianyu Zheng.Rapid and robust initialization for   monocular visual inertial navigation within multi-state Kalman filter.   Chinese Journal of Aeronautics,2018,31(1):148-160.

[18] Pei Lei, Lianyu Zheng, Lihui Wang, et al. MTConnect   compliant monitoring for finishing assembly interfaces of large-scale   components: A vertical tail section application. Journal of Manufacturing   Systems. 2017, 45: 121–134. http://

dx.

[19] Wei Fang, Lianyu Zheng, Xiangyong Wu. Multi-sensor based   real-time 6-DoF pose tracking for wearable augmented reality

Computers in Industry,2017,92:91–103.   http://dx.

[20] Wei Fang, Lianyu Zheng, Jiaxing Xu. Self-contained   optical-inertial motion capturing for assembly planning in digital factory.   International Journal of Advanced  Manufacturing Technology, 2017, DOI:   10.1007/s00170-017-0526-4.

[21] Wei Fang, Lianyu Zheng, Huanjun Deng and Hongbo Zhang.   Real-Time Motion Tracking for Mobile Augmented/Virtual Reality Using Adaptive   Visual-Inertial Fusion. Sensors 2017, 17(5), 1037; doi:10.3390/s17051037

[22] Pei Lei, Lianyu ZHeng. An automated in-situ alignment   approach for finish machining assembly interfaces of large-scale   components.Robotics and Computer Integrated Manufacturing,2017，DOI：10.1016/j.rcim.2017.01.004

[23] Pei Lei, Lianyu ZHeng, et at. A closed-loop machining   system for assembly interfaces of large-scale component based on extended   STEP-NC.International Journal of Advanced  Manufacturing Technology.   2017， DOI: 10.1007/s00170-016-9904-6

[24] Wei Fang, Lianyu Zheng, et al. Automatic 3D Model   Acquisition for Unknown Objects based on Hybrid Vision.International Journal   of Precision Engineering and Manufacturing. 2017，18（3）：275-284.

[25]Wei Fang, Lianyu Zheng, Xusheng Zhu. A motion tracking   method by combining of IMU and camera in mobile devices. International   Conference on Sensor Technology, November,2016, Nanjing, China. DOI:   10.1109/ICSensT.2016.7796235

[26] Hongbo Zhang, Lianyu Zheng, Xiwei Chen, Haiji Huang. A   Novel Reconfigurable Assembly Jig Based on Stable Agile Joints and Adaptive   Positioning-Clamping Bolts. 6th CIRP Conference   on Assembly   Technologies and Systems (CATS). Procedia CIRP 44 (2016): 316 –321。

[27] Zhu Xusheng, Zheng Lianyu, Tang Xiaojun. Configuration   optimization of laser tracker stations for large-scale components in   non-uniform temperature field using Monte-Carlo method[C]. 9th CIRP   International Conference on Digital Enterprise Technology - DET 2016 –   “Intelligent Manufacturing in the Knowledge Economy Era. Nanjing, China,   2016.  Procedia CIRP, 2016, 56:261-266

[28]张宏博，郑联语，王艺玮. 基于模块服役状态的盒式连接可重构型架稳定性评估方法. 航空学报,2020,已录用。

[29] 李树飞，郑联语，刘新玉，王天睿．AR 眼镜辅助的线缆连接器装配状态智能检错方法．计算机集成制造系统，2020, http://kns.cnki.net/kcms/detail/11.5946.TP.20200520.1634.014.html

[30] 王亚辉，郑联语，樊伟。云架构下基于标准语义模型和复杂事件处理的制造车间数据采集与融合.计算机集成制造系统，2019。10.13196/j.cims.2019.12.012

[31] 张宏博,郑联语，刘新玉，李树飞。基于信息物理系统的可重构装配型架智能装调技术.计算机集成制造系统，2019。10.13196/j.cims.2019.11.001

[32 赵雄，樊伟, 郑联语等, 基于优化STD法的大飞机垂尾装配界面精加工过程模态参数识别[J].航空学报, 2019, 40(9)。

[33] 樊伟, 郑联语, 赵雄等. 基于新型电涡流阻尼器的大飞机垂尾装配界面精加工振动抑制[J]. 航空学报, 2019, 40(9): 422859

[34] 秦兆君，郑联语，张宏博，徐嘉兴.可重构柔性型架的智能装调与监测系统开发及应用.航空制造技术，2018.

[35] 樊伟，郑联语，王亚辉. 管路组件可重构装配工装系统的定位器自动配置与性能分析[J]. 航空学报, 2018, 39(5): 42198.

[36] 樊伟，郑联语，王亚辉. 面向管路组件装配的自动化可重构柔性工装系统[J]. 计算机集成制造系统, 2018,24(11).

[37] 陈锡伟，郑联语，张宏博。 关联设计技术在翼面类部件可重构装配型架设计中的应用研究。航空制造技术，2017年第11期：46-51。

[38] 曹逸凡，郑联语，张宏博。智能眼睛辅助的激光跟踪仪移动测量系统。航空制造技术，2017第20期:60-66.

[39] 雷沛，郑联语.面向飞机大部件调姿的PPPS机构球铰点中心位置闭环标定方法.航空学报，2016，37（10）：3186-3196

[40] 大尺寸测量技术在航空制造中的应用及关键技术. 航空制造技术，2013 (07)：30-33

[41] 基于关键装配特性的大型零部件最佳位姿多目标优化算法. 航空学报. 2012(09)：171-181

[42] 基于STEP-NC的闭环加工系统研究与实现. 计算机集成制造系统，2011,17(11):2389-2398

[43]产品族工装配置技术研究与实现. 计算机集成制造系统，2011，17（3）：585-594

[44] Key characteristics management in product lifecycle   management: A survey of methodologies and practices. Proceedings of the   Institution of Mechanical Engineers Part B：Journal of   Engineering Manufacture,2008，222（B8）：989-1008.

[45]Systematic modeling and reusing of process knowledge for   rapid process configuration. Robotics and Computer Integrated   Manufacturing,2008，24（6）：763-772.

[46]薄壁零件数控加工工艺质量改进方法. 航空学报,2001，22（5）：425-42

软件著作权：

[1] 工艺失效分析知识库系统V1.0（PFMEA）。软件著作权号：2005SRBJ0305

[2] 制造元数据注册系统V1.0。软件著作权号：2006SRBJ0907

[3] 可视化工艺设计系统V1.0（VISPP）。软件著作权号：2008SRBJ0882

[4] 产品族工装资源快速配置与管理系统V1.0（RTCMS）。软件著作权号：2010SRBJ0098

[5] 集成大尺寸测量软件系统（ILVMS）。软件著作权号：2012SR015505

[6] 盒式连接可重构柔性工装设计软件。软件著作权号：2013SR059108

[7] 汽车白车身焊装生产线工艺及夹具设计软件。软件著作权号：2014SR181801

[8] 盒式连接可重构型架智能装调与监控软件。软件著作权号：12018R11L112366

[9] 设备互联与数据处理软件。软件著作权号：2019SR0529723

[10]飞机线缆支架装配状态视觉检测软件.软件著作权号：2019SR1402243

发明专利：

[1] 一种管路整体装焊的可重构工装. 专利号：ZL   2011 1 0279402.6 

[2] 一种管路装焊可重构工装自动配置方法及系统. 专利号：ZL 2011 1 0444781.X

[3] 一种基于测量数据的管路性装焊机器人位姿计算方法.专利号：ZL 2014 1 07377530

[4] 一种管路柔性装焊的导管余量切割位置计算方法.专利号：ZL 2014 1 07303895

[5] 一种基于球干涉的汽车白车身焊点自动划分方法. 专利号：ZL 2014 1 07302680

[6]一种自锁式气电驱动辅助支撑装置。专利号 ZL201510153834.0

[7]一种夹紧力可监控的定行程凸轮夹紧装置。专利号 ZL201520195411.0 （实用新型）

[8] 飞机大部件装配界面精加工坐标测量控制网的建立方法. 专利号ZL 2015 1 0641527.7

[9] 一种通过智能眼镜移动控制激光跟踪仪的方法及系统. 专利号 ZL 2016 1 0610104.3

[10] 基于移动端-服务器架构的移动控制激光跟踪仪的系统. 专利号 ZL 2016 1 0610428.7

[11] 一种基于最小二乘法的飞机装配型架骨架优化布局方法. 申请号 201711032624.1

[12] 一种基于单目视觉的航空导线编号识别的图像采集装置. 申请号 201810945551.3

[13]一种基于深度学习与多目标分布排序的航空插头孔位识别方法.申请号：201910264451.9

[14]一种基于视觉的飞机线缆支架装配状态检测方法. 专利号：ZL 2019 1 0434969.2

[15]一种基于深度学习和双目立体视觉的飞机线缆支架识别与参数获取方法. 申请号：2019104349777

[16]基于复杂事件处理的制造车间多源异构数据融合方法及系统. 申请号：2019104971445

◆学术与社会服务

国际智能制造学报（Journal   of Intelligent Manufacturing, JIM）编委；

乌克兰工程科学学报（Journal   of Engineering Sciences，ISSN 2312-2498)编委；

数字化设计与制造北京市重点实验室学术委员会委员；

中国机械工程学会机械工业自动化分会委员；
  中国机械工程学会成组与智能集成技术分会委员；

中国人工智能学会智能制造专业委员会委员；

中国自动化学会制造技术专业委员会委员；

《计算机集成制造系统》理事；

中航工业柔性智能工艺装备研制中心学术委员会委员兼副主任；
  中国机械工程学会高级会员；国家自然科学基金、中国博士后基金、航空基金、各类国家级项目评审专家；

u Education experience：

1985/09-1989/07：bachelor's degree in Mechanical   Engineering, Beihang university

1990/09-1993/03：master's degree in Mechanical   Engineering, Beihang university

1997/09-2001/07：PH.D in Mechanical Engineering , Beihang   University

2007/07-2007/08：professional course entitled “Design and   manufacturing technologies for commercial airplane”, Cranfield University,   United Kingdom

u Work experience

1993/04-1994/07：Assistant Lecturer, Department of   Manufacturing Engineering, Beihang University, China

1994/08-1999/07：Lecturer, Department of Manufacturing Engineering,   Beihang University, China

1999/08-2009/07：Associate Professor, School of   Mechanical Engineering and Automation, Beihang University, China

2002/04-2002/06：Senior Research Associate (SRA), Department   of Manufacturing Engineering and Engineering Management, City University of Hong   Kong, China

2006/10-2007/09: Visiting Scholar, Department of Mechanical   Engineering, University of Bath, United Kingdom

2009/08-present ：Professor, School of Mechanical   Engineering and Automation, Beihang University, China

u Teaching Courses

u  Computer   Aided Manufacturing (for undergraduate students)

u  Modeling   and Simulation for Manufacturing Systems (for graduate students)

u  Supervisor   of graduate students: more than 60 master science degree students、8 PhD   students，5 master engineering students

u Research Areas

 Currently   research interests include digital and intelligent manufacturing (CAD/CAPP/CAM/CNC）,  reconfigurable   and flexible smart manufacturing system, dimension metrology and quality   control, and manufacturing system modeling and simulation, Digital and smart   Factory. He has published more than 100 papers in which include a number of   international journal and conference papers. 8 software copyrights and 12   patents have been authorized by State Intelligent Property office of P. R.C   (SIPO).

Professor   Lianyu Zheng is currently the Head of Department of Industrial and   Manufacturing Systems Engineering, Biehang University, School of Mechanical   Engineering and Automation, Beihang University(BUAA). He is a member of Editorial   Board of Journal of Intelligent Manufacturing, a senior member of Chinese   Society of Mechanical Engineering (CSME), the academic member of Mechanical   Automation Committee of CSME, the academic member of Group Technology and   Intelligence Integration Committee of CSME, the academic member of   Intelligent Manufacturing Committee of Chinese Society of Artificial   Intelligence，as well as the academic member of the Key Lab of Advanced   Assembly Technology and of the Development Center of flexible and intelligent   tooling of AVIC(Chinese Aviation Industry Company). As reviewer or expert he has   been working for a number of international journals (Journal of Intelligent   Manufacturing; International Journal of Computer Integrated Manufacturing;   IMech Part B: Journal of Engineering Manufacturing, etc) and a number of   national journals including Computer Integrated Manufacturing System, Acta   Aeronautica et Astronautica Sinica (AAAS) and Chinese Journal of Aeronautics   (CJA), etc.

u Representative Publications

[1]Yiwei WANG, Jian Zhou, Lianyu Zheng*, Christian GOGU.An   end-to-end fault diagnostics method based on convolutional neural network for   rotating machinery with multiple case studies.Journal of Intelligent   Manufacturing,2020

[2]Wang Qilong,Wei Wang*,Lianyu Zheng,Chao Yun.Force   control-based vibration suppression in robotic grinding of large thin- wall   shells.Robotics and Computer-Integrated Manufacturing August 2020.

[3]Wei Fan,Wei Ji,Lihui Wang*,Lianyu Zheng,Yahui Wang.A Review   on Cutting Tool Technology in Machining of Ni-Based Superalloys.International   Journal of Advanced Manufacturing Technology,September 2020.

[4] Shufei Li, Pai Zheng, Lianyu Zheng*. An AR-Assisted Deep   Learning Based Approach for Automatic Inspection of Aviation Connectors. IEEE   Transactions on Industrial Informatics,2020,DOI: 10.1109/TII.2020.3000870.

[5] Lianyu Zheng*, Xinyu Liu, Zewu An,et al. A smart assistance   system for cable assembly by combining wearable augmented reality with   portable visual inspection.Virtul Reality and Intelligent Hardware.February   2020,DOI: 10.1016/j.vrih.2019.12.002

[6]Wei Fan, Lianyu Zheng*,et al. A machining accuracy informed   adaptive positioning method for finish machining of assembly interfaces of   large-scale aircraft components. Robotics and Computer Integrated   Manufacturing 67 (2021) 102021.  

[7] Wei Fan, Lianyu Zheng,et al. Function block-based   closed-loop adaptive machining for assembly interfaces of large-scale   aircraft components.Robotics and Computer Integrated   Manufacturing,2020,

[8] Zewu An, Yiwei Wang, Lianyu Zheng*. Adaptive Recognition of   Intelligent Inspection System for Cable Brackets in Multiple Assembly   Scenes.The International Journal of Advanced Manufacturing Technology.   2020,108(11):3373-3389. DOI: 10.1007/s00170-020-05591-5

[9]Jian Zhou Lianyu Zheng,Yiwei Wang*,Christian Gogu.A   multistage deep transfer learning method for machinery fault diagnostics   across diverse working conditions and devices.IEEE Access,2020,DOI:   10.1109/ACCESS.2020.2990739.

[10] Wei Fang, Lianyu Zheng*. Shop-floor data-driven   spatial-temporal verification for manual assembly planning. Journal of   Intelligent Manufacturing.2019, online 12 Stempber 2019.

[11] Wei Fan, Lianyu Zheng*, et.al. Eddy Current-Based Vibration   Suppression for Finish Machining of Assembly Interfaces of Large Aircraft   Vertical Tail.Journal of Manufacturing Science and Engineering,   2019,141:071012-1~071012-16.

[12] Hongbo Zhang, Lianyu Zheng*, et.al.Intelligent configuring   for agile joint jig based on smart composite jig model. The International   Journal of Advanced Manufacturing Technology. 2019,  

[13] Yong Zhou,Jian-Jun Yang,Lianyu Zheng*.Multi-agent based   hyper-heuristics for multi-objective flexible job shop scheduling: A case   study in an aero-engine blade manufacturing plant.Feb 2019,IEEE Access.DOI   0.1109/ACCESS.2019.2897603,

[14] Yong Zhou,Jian-Jun Yang*,Lianyu Zheng.Hyper-heuristic   coevolution of machine assignment and job sequencing rules for   multi-objective dynamic flexible job shop scheduling.Nov 2018,IEEE Access.

[15] Yahui Wang, Lianyu Zheng*,Yu Hu, Wei Fan.MULTI-SOURCE   HETEROGENEOUS DATA COLLECTION AND FUSION FOR MANUFACTURING WORKSHOP BASED ON   COMPLEX EVENT PROCESSING.48th International Conference on Computers and   Industrial Engineering (CIE 48), Auckland, New Zealand, Dec. 2-5, 2018.

[16] Wei Fan,Lianyu Zheng*,Yahui Wang.An automated   reconfigurable flexible fixture for aerospace pipeline assembly before   welding. International Journal of Advanced  Manufacturing Technology,   2018,

[17] Wei Fang, Lianyu Zheng*.Rapid and robust initialization for   monocular visual inertial navigation within multi-state Kalman filter.   Chinese Journal of Aeronautics,2018,31(1):148-160.

[18] Pei Lei, Lianyu Zheng*, Lihui Wang, et al. MTConnect   compliant monitoring for finishing assembly interfaces of large-scale   components: A vertical tail section application. Journal of Manufacturing   Systems. 2017, 45: 121–134. http://

dx.

[19] Wei Fang, Lianyu Zheng*, Xiangyong Wu. Multi-sensor based   real-time 6-DoF pose tracking for wearable augmented reality. Computers in   Industry,2017,92:91–103. http://dx.

[20] Wei Fang, Lianyu Zheng*, Jiaxing Xu. Self-contained   optical-inertial motion capturing for assembly planning in digital factory.   International Journal of Advanced  Manufacturing Technology, 2017, DOI:   10.1007/s00170-017-0526-4.

[21] Wei Fang, Lianyu Zheng*, Huanjun Deng and Hongbo Zhang.   Real-Time Motion Tracking for Mobile Augmented/Virtual Reality Using Adaptive   Visual-Inertial Fusion. Sensors 2017, 17(5), 1037; doi:10.3390/s17051037

[22] Pei Lei, Lianyu Zheng*. An automated in-situ alignment   approach for finish machining assembly interfaces of large-scale   components.Robotics and Computer Integrated Manufacturing,2017，DOI：10.1016/j.rcim.2017.01.004

[23] Pei Lei, Lianyu Zheng*, et at. A closed-loop machining   system for assembly interfaces of large-scale component based on extended   STEP-NC.International Journal of Advanced  Manufacturing Technology.   2017， DOI: 10.1007/s00170-016-9904-6

[24] Wei Fang, Lianyu Zheng*, et al. Automatic 3D Model   Acquisition for Unknown Objects based on Hybrid Vision.International Journal   of Precision Engineering and Manufacturing. 2017，18（3）：275-284.

[25]Wei Fang, Lianyu Zheng*, Xusheng Zhu. A motion tracking   method by combining of IMU and camera in mobile devices. International   Conference on Sensor Technology, November,2016, Nanjing, China. DOI:   10.1109/ICSensT.2016.7796235

[26] Hongbo Zhang, Lianyu Zheng*, Xiwei Chen, Haiji Huang. A   Novel Reconfigurable Assembly Jig Based on Stable Agile Joints and Adaptive   Positioning-Clamping Bolts. 6th CIRP Conference   on Assembly   Technologies and Systems (CATS). Procedia CIRP 44 (2016): 316 –321。

[27] Zhu Xusheng, Zheng Lianyu*, Tang Xiaojun. Configuration   optimization of laser tracker stations for large-scale components in   non-uniform temperature field using Monte-Carlo method[C]. 9th CIRP   International Conference on Digital Enterprise Technology - DET 2016 –   “Intelligent Manufacturing in the Knowledge Economy Era. Nanjing, China,   2016.  Procedia CIRP, 2016, 56:261-266

 [28] Xiao wenlei, Zheng Lianyu*, et al. A complete   CAD/CAM/CNC solution for STEP-NC enabled manufacturing, Robotics and Computer   Integrated Manufacturing, 2015（31）：1-10

[29]. Lei Pei, Zheng Lianyu. Closed-loop calibration method of   PPPS mechanism ball joint center position for posture adjustment of large   aircraft components. Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica,   2016, v 37, n 10, p 3186-3196;

[30] Zheng Lian-Yu; Liu Qing-Jun; Zhang Hong-Bo. Rapid   configuration for box-joint assembly jigs based on composite tooling . Jisuanji   Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 2013,v   20, n 10, p 2426-2439.

[31] Zheng Lianyu, Zhu Xusheng, et al. A novel algorithm of   posture best fit based on key characteristics for large components assembly.   Procedia CIRP 10, 2013, 162-168.

[32] Zhu, Xusheng, Zheng, Lianyu. Multiple-objective   optimization algorithm based on key assembly characteristics to posture best   fit for large component assembly. Hangkong Xuebao/Acta Aeronautica et   Astronautica Sinica, 2012,v 33, n 9, p 1726-1736

[33]Zheng, L.-Y., Liang, D.-W., Lei, P.   Research and implementation of   closed-loop machining technology based on STEP-NC. Jisuanji Jicheng Zhizao   Xitong/Computer Integrated Manufacturing Systems, CIMS. 2011,Volume   17, Issue 11, November 2011, Pages 2389-2398

[34] Zheng, L.-Y.,  Ji, L. Research and   implementation of tooling configuration for product family. Jisuanji Jicheng Zhizao   Xitong/Computer Integrated Manufacturing Systems, CIMS. Volume 17,   Issue 3, March 2011, Pages 585-594

[35] Ni A.-J., Zheng L.Y. Optimal   configuration method for large-scale measurement systems based on form error   uncertainty Jiliang Xuebao/Acta Metrologica   Sinica. Volume 32, Issue 4, July 2011, Pages 289-295.

[36] Key characteristics management in product lifecycle   management: A survey of methodologies and practices. Proceedings of the   Institution of Mechanical Engineers Part B：Journal of Engineering   Manufacture,2008，222（B8）：989-1008.

[37]Systematic modeling and reusing of process knowledge for rapid   process configuration. Robotics and Computer Integrated Manufacturing,2008，24（6）：763-772.

[38] Zheng, L.-Y., Wang, S.-C. Approaches to   improve the process quality of thin-walled workpiece in NC machining.Hangkong Xuebao/Acta Aeronautica   et Astronautica Sinica. Volume 22, Issue 5, September 2001, Pages   424-428

u Awards

l   1997 Progressive Science and Technology Award (the third   grade)from Chinese Aviation Industry Company

l   2003 Excellent Youth Paper Award (the third grade) from the   Beijing Society of Science and Technology

l   2008 Progressive Science and Technology Award (the second grade)   from the Ministry of Industry and Information Technology (MIIT) of China.

l   2008 Progressive Science and Technology Award (the second grade)   from Chinese Aviation Industry Company .

l   2010 Excellent Teaching Achievement (the second grade), Awarded   by Beihang University

l   2013 Excellent Supervisor of MSc thesis, awarded by Beihang   University

●   2014 Excellent Teaching Achievement (the first grade), Awarded   by Beihang University

l   2015 High Cited paper of Acta Aeronautica Et Astronautica Sinica

l   2016 Excellent Paper of Acta Metrogia Sinaica

l   2016 Excellent Course for Foreign Students 《Introduction   to Advanced Manufacturing Technology》

u Main software copyrights and patents

Software:

[1] Knowledge System for Process Failure Mode and Effect   Analysis（PFMEA）. Copyright No: 2005SRBJ0305

[2] Registration System of Manufacturing Metadata. Copyright No:   2006SRBJ0907

[3] Visual Process Planning System V1.0（VISPP）.   Copyright No: 2008SRBJ0882

[4] Rapid Configuration and Management System of Tooling   Resource for Product Family（RTCMS）. Copyright No: 2010SRBJ0098

[5] Integrated Large-Volume Measurement Software System (ILVMS).   Copyright No:2012SR015505

[6] Design System for Box-joint based Reconfigurable Tooling.   Copyright No: 2013SR059108

[7] Process and Fixture Design Software for Body-In-White   Assembly and Welding. Copyright No: 2014SR181801

[8] Intelligent adjusting and monitoring for Box-joint based   Reconfigurable Tooling.Copyright No 12018R11L112366

Patents：

[1] A best fit algorithm for large component assembly posture. Application No：201110053699.4，Application   date：2011.03.07；

[2] A reconfigurable tooling for multiple tubes assembly and   welding. Application No: 201110279402.6, Patent No：ZL   2011 1 0279402.6

[3] An automatic configuration method and system of   reconfigurable tooling for tubes assembly and welding.  Application No：201110444781.X, Patent No：ZL 2011 1   0444781.X 

[4] A robot posture algorithm for flexible tube assembly and   welding based on vision measurement data. Application No：2014107377530.   Patent No：ZL 2014 1 07377530

[5] A cutting position algorithm of tube allowance for flexible   assembly and welding. Application No：2014107303895

[6] A automatic spots grouping method for body-in-white based on   sphere interference. Application No：2014107302680

[7] Measurement network construction for assembly interfaces   machining of large-scale components. Application No：201510641527.7

[8] Mobile controlling method and system for Laser tracker using   smart glass.  ZL 2016 1 0610104.3